Plane Doe // Printable RC Plane

thingiverse

This text appears to be a building guide and specifications for an RC (Radio Controlled) airplane model designed using 3D printing technology. The model seems to be quite advanced, with features such as servo installation, aileron movement, and a detailed specification sheet. Here are the main points summarized: **Assembly Guide:** 1. Print all parts required. 2. Assemble the rear section by attaching the fin and servo. 3. Attach the elevator parts (two times for left and right sides). 4. Connect the wing parts using carbon tubes (1000mm) and hot glue. 5. Install servos in the wings, securing them with steel wire and hot glue. **Specifications:** 1. Airfoil: NACA 2212 2. Center of gravity: 35mm 3. Wingspan: 990mm 4. Wing loading: 45 g/dm2 5. Takeoff weight: 715g 6. Length: 600mm **Flight Characteristics:** 1. Stall speed: 31 kph (19 mph) 2. Horizontal speed: 77 kph (48 mph) 3. Vertical Speed: 9.6 m/s (1900 ft/min) 4. Flight time: 5-6 minutes 5. Static thrust: 1150g 6. Propeller rpm: 9500 rpm **Servo Settings:** 1. Elevator neutral: -3 deg 2. Elevator max up: +15 deg 3. Elevator max down: -15 deg The guide also includes some notes on safety, as the plane is not intended for children or beginners and can be hazardous if not handled properly. Lastly, there are two updates mentioned: 1. An updated "fin_V2" was uploaded, which is lighter than the original. 2. The "fuselage_mid" part was updated to make it more stable. Overall, this appears to be a detailed guide for building and flying an advanced RC airplane model.