PL1Q Vampire, the 3d printable quadcopter

thingiverse

Check out the new PL2Q Hugin version at http://www.thingiverse.com/thing:19161! This 3D printable quadcopter frame has all parts printable. Watch a demonstration video at http://www.youtube.com/watch?v=DLrN-lrLtUs For those who already have the PL1Q, most parts should be compatible with some modifications. Download, print, build, and fly! Worried about 3D printed arms breaking in flight? Check out this video to ease your concerns: http://www.youtube.com/watch?v=RwZ5aTlU0iY New updates include an optional 3cm taller canopy and reduced bridging by 50%. Watch the latest flight video here: http://www.youtube.com/watch?v=kSO47eAsI-E Smaller files are available for printing on makers like MakerBot, but gluing may be required. Leave a comment if you've printed it successfully! The presentation video showcases the PL1Q on an Ultimaker with PLA using 100% infill on motor mounts and arms. Landing gears require 40% infill for hard landings. The total weight is approximately 231.6g. CA glue was used to fasten motor mounts to the arms, while canopies lock them in place. A different color for front arms could be useful for orientation during flight, especially for FPV use. A suggested cheap setup includes: - 4x A2208-17 1000KV motors (http://www.goodluckbuy.com/a2208-17-1000kv-outrunner-brushless-motor-for-rc-helicopter-multicopter-4-pack.html) - 4x Turnigy Plush 12amp (2A BEC) ESCs (http://www.hobbyking.com/hobbyking/store/__2161__TURNIGY_Plush_12amp_2A_BEC_BESC.html) - MultiWii Lite Lightweight Version 4-axis Flight Control Board QUADX (http://www.goodluckbuy.com/mwc-multiwii-lite-4-axis-x-mode-flight-control-board-quadx-w-ftdi-basic-breakout-.html) - GAUI 330X 8" Propellers (http://www.gonitrohobbies.com/GAUI_330X_8_Props_G_210801_p/g-210801.htm) - Prop adapter (4x 3.175mm motor shaft 5mm prop hole, http://www.valuehobby.com/3-175mm-collet-adapter-for-e300-e370-e400-e450-motors-5mm-prop-axle.html) Don't forget a receiver, radio, 3S lipo battery around 2200mAh (with charger), and stay tuned for future revisions and accessories!