Pixhawk / APM / Ardupilot Quadcopter / Multicopter setup

thingiverse

Quad/multicopter setup Vibration mount not designed by me but remixed from Storkglide : https://www.thingiverse.com/thing:1451806 Electronics bay printed with very tight margins, you may have to adjust a little. Included Sketchup file to edit. Some items need to be rotated for printing. Bracket that holds Pixhawk in place is fastened with 4 x M3 screws. For APM I did not make a bracket yet. Let me know if needed. Enjoy! UPDATE: Forgot to mention, the enclosures have mounting strips to slide the box onto the top plate. For printing without support, I made a thin wall (red strip on the side of the enclosure, see picture) to support the mounting strip overhang for printing, which has to be removed after printing. Just break off the thin wall (red strip) on the side of the enclosures and slide to mount. Enclosures are half open, and should be closed with their respective sliding cover. Ciao! UPDATE: Design slightly modified. Top plate and boxes sliding slots swapped. The enclosures cracked when margins were a bit tight. Now it's the other way around, which is much stronger and won't crack the print. Small corrections here and there for margins. UPDATE 18/09/16 Added box for X8R Rx Uploaded newest STLs Changed Pixhawk mount to have also a Storm32 BGC mounted together with the Pix to take advantage of the dampers, in case you can not mount the Storm32 on the gimbal. Update 12/12/16 An update by Adibbins (Thanks Andrew!), who provided me with a telemetry box for the V2 versions of the '3dr' 433 telemetry radios.