Piper 2 Accessories

thingiverse

I've added some accessories to enhance the functionality of the Piper 2 3D printer designed by Alex Balako. Piper 2 can be found at https://www.thingiverse.com/thing:3022836, while the updated version, Piper 2.2, is available at https://www.thingiverse.com/thing:3294998. My own printer has been assembled but still requires calibration, and I haven't yet attempted to print. Here are some accessories I've created: * Cable Wire Harness + Attaches to the pipe wherever needed using the universal-pipe-bracket.stl from Piper 2. * End Caps + Prevents cutting hands on the end pipes while adding a touch of flair. * Cord Hanger (not yet tested in a working printer) + Made with extra pipe and frame-Z_2x_corner.stl parts from Piper 2, this cord hanger features a retractable lanyard. + I built my printer with a height of 350mm to accommodate this feature and provide about 300mm print area. + With the retractable lanyard, it's probably too tall; I might try a smaller lanyard and reduce the height of the printed parts. * Heated Bed Mount + Allows for manual leveling of a heated bed, designed for a 300 mm x 300 mm bed. + This part has not been tested in a working printer yet. + Required components: bed-mount-2_0.stl, thumbwheel.stl, 4 screws (m3x30mm), 4 compression springs, 8 washers, and 4 m3 nuts. Planned Accessories: * Platform for power supply and MOSFET's * Platforms for MCU's * Mount and bezel for 7" touchscreen and Raspberry Pi