Pinball Mod: Serial Connector for WPC-95
thingiverse
Serial Connector Mod for WPC-95 Pinball Games (e.g. NBA Fastbreak).I designed two Versions of it. The A-type has an additional edge, which will keep the ventilation grille in place after moving it aside.Further infomation to link two NBA Fastbreaks can be found on ipdb.org: https://www.ipdb.org/files/4023/Bally_1997_NBA_Fastbreak_Linking_Kit_Installation_Instructions_for_Linking_Kit_58030.pdfYou will need two NBAs, two of these mods and a crossed serial cable (Nullmodemkabel) with female connectors on both ends.For these mod you will need:4x Cabinet Screws1x 9-pin D-Sub Male connector for wire soldering1x mounting kit for D-Sub connectors3x ~40cm wires3x shrink tubing for the wires1x Molex 22013037 connector (or similar) including crimpsPinning:D-Sub | Molex | Signal2 | 2 | RX3 | 3 | TX5 | 1 | GroundThe "Nose" at Pin3 has to be removed to fit the connector into the mating connector of the board
With this file you will be able to print Pinball Mod: Serial Connector for WPC-95 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Pinball Mod: Serial Connector for WPC-95.