pimp my prusa x motor camera mount (growing timelapse effect)

myminifactory

*update: added logi c270hd mount (logi-mount-v2)* On Logi C270HD, all stand parts need to be removed first. The logi-mount-v2 then mounts to the camera body with a M3x30 screw, which I think is the correct size. The rest fits together in the same way as the Raspi Cam does. ********************** Raspi Camera Mount for Prusa MK3 This mount attaches to an X motor carriage using an M3 bolt on the 4th unused motor mount. It's fully adjustable, making it easy to print and suitable for printers with smaller build volumes. The camera moves along with the X carriage, giving a cool effect of a growing model from a build plate when used with Octolapse, which keeps the bed in place during shots. If the camera mount gets in the way during maintenance work, you can simply rotate it 90 degrees counter-clockwise or remove it by undoing the M3 bolt. It should be compatible with all printers that use M3 bolts, spacers, and nuts. For the movable joints, a length of 25-30mm is recommended, while for the camera case, an M3 bolt with a length of at least 16mm is required. However, I couldn't determine the exact length needed for the motor mount part as I don't own a Prusa MK3 myself. This design was created for the #PimpMyPrusa design challenge and has not been tested on a Prusa printer due to my lack of ownership. However, it does work on my other printer, and the parts were designed around available MK3 Prusa STL files.