Piggy Van Construction Toy

prusaprinters

<p>Click-snap assembly (no glue, no bolts). Can be taken apart afterwards.<br/> Designed to be printed with 0.6 (or smaller) nozzle at 0.2 layer height, no supports needed.</p> <p>This little van can serve as a piggy bank with one of the roof inserts.</p> <p>If you like this thing, you could support me by purchasing the full version<br/> that has an interior and steering. Can be found here on Cults:<br/> <a href="https://cults3d.com/en/3d-model/game/piggy-van">https://cults3d.com/en/3d-model/game/piggy-van</a></p> <p>Explosion diagram in 3d viewer (Sketchfab): <a href="https://skfb.ly/6W9wB">https://skfb.ly/6W9wB</a></p> <p>10x10x6cm, 70g.</p> <h3>Print instructions</h3><h3>Print Settings</h3> <p><strong>Printer Brand:</strong> Anet</p> <p><strong>Printer:</strong> A8</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Filament:</strong> Bestfilament PLA Sky Blue, Grey, Beige<br/> <strong>Notes:</strong></p> <p>Designed to print well with 0.6 nozzle (wood filament friendly).<br/> Printed at 0.2 layer height.</p> <p>Don't forget to reduce the layer height if you plan to downscale it. Should print well at 50% scale with 0.3 nozzle at 0.1 layer height. Didn't test the assembly though - the gaps may become too small. Should print upscaled with no issues.</p>