Pig money box-2019

thingiverse

Pig Money Box-2019 Remix: http://www.dayin.la/product/103974.html?fbclid=IwAR1YAEH3kg9yU-2ATL4b_TMk3D3fn0Nu9_wLCQPT0YXBlAlj06HWA2AMP68 The pig money box has two sizes: 170mm and 68mm. If you don't want to use any support, you can print "pigbox_170all_RE". After printing, turn the bottom cover. (1) The 170mm pig is a small piggy bank with a coin slot. You'll need to print both the 170body and 170cover files. You can also add an optional 168 base plate for easier assembly. To assemble the body, you'll need to add a small ring support under the coin slot. For the cover, it's recommended to add some internal supports as well. We suggest using CURA 3.6's "partial support" feature to add minimal supports only where needed. For more information on using CURA's partial support feature, please refer to this blog post: http://3dppark.com/blog/cura364573690 If you prefer not to use any internal supports, you can print "pigbox_170all_RE". After printing, simply turn the bottom cover firmly and it should open. However, be aware that printing without supports may increase the risk of a stuck or damaged part. Make sure your 3D printer is in good working condition and check the filament before printing. If possible, test print the base plate separately first. (2) The 68mm pig is a solid object that can be freely scaled up or down as desired. You can also modify the design to create a thin-walled shell with coin slots and a retrieval hole. Alternatively, you can print it hollow without any internal supports.