Picture hanger clips - 7 minutes print

prusaprinters

<p>Hello everybody!</p><p>I've always wanted one of those hanging picture setups in my room and as a maker i thought this was the perfect occasion to print one!</p><p>&nbsp;</p><p><strong>Printing:</strong></p><p>The print itself is really easy, it only takes seven minutes for a couple to be printed, but you can print as many as you want to hang multiple pictures.</p><p>I suggest printing with only one vertical wall to avoid bulking due to the thickness of the wall.</p><p>I used 20% rectilinear infill for the print and a 0.4 nozzle at 0.2 mm layer height, but any nozzle and layer height should do the job, as long as you manage to keep dimensional accuracy.</p><p><strong>Assembly:</strong></p><p>For the assembly you will need a string, any king should be good if it fits, i used a jute one which looks good to me and has some texture, but you can also use fishing wireto have a floating effect.</p><p>You can tie your string to a nail or to any feature offered by the wall/bed/wardrobe etc…</p><p>If you have any doubt just look at the picture.</p><p>The gap is 0.15 mm wide, if you find it a bit tight try spreading it with a pencil, just don't exaggerate.</p><p>&nbsp;</p><p>Hope everything is clear,</p><p>Have fun and make it simple!</p><p>Vittorio</p>