Pico 4 magnetic Open face gasket with big FOV

thingiverse

Open Face Gasket for Pico 4 with big FOV and full body visibility. I remixed this from @LWC_243415 model on Printables website. https://www.printables.com/model/319524-pico-4-magnetic-face-gasket-comfort-fov-increase-v I made quite a few changes: + I got rid of the nose part, so you can look at your real body once in VR. I feel this helps immersion as well as help with better ventilation. + I made the faceplate thinner, so your face sits closer to the lenses. On my Pico 4 I have installed the prescription inserts, and it works quite well. + I modeled a new wider and taller forehead lip for improved head support. It's also better for light blocking from the top. This new lip helps to print the face gasket without any supports. + The face gasket has 2 top air vents (excellent vents from the @LWC_243415 original). I removed the side vents since they are no longer needed due to the bottom opening. + The original was designed to hold 6mmx3mm magnets, I modified mine to hold 5mmx5mm magnets. You can find them on Amazon: https://a.co/d/7mnEijL Assembly notes: Be sure to use superglue to hold the magnets in place, take into account that the Pico 4 magnets are attached with different polarities, so make sure to test their orientation before installation. Use Velcro strips to attach face padding. I used the VRcover extra piece that I had for my Quest 2, but you can use any brand, or make your own. Print with black filament (matte finish preferred). In my opinion, you do not need the 2 insertable pins at the top from the original model. I left the holes just in case you feel they are needed. I also found that the black tones on the Pico appear a bit darker now. I believe this has to do with the light coming from the open bottom of the face gasket forces your pupil to close a bit more, perceiving the black tones a bit darker.