Pick display

prusaprinters

<p>I designed this pick display for a couple of guitar picks I recently got on some shows that I wanted to keep in a display and decided to design one for myself.</p> <p>This is the basic version of my design, this lets you add in Meshmixer the band logo on the front to be displayed along with the pick.</p> <p>The square on the back it's for adding blue-tack and still be able to be flush with the wall.</p> <p>Or you can put a small picture frame and there's a hold for that as well it's a bit too shallow, but it works might even work with a flat headed needle, so the damage to the wall is minimal.</p> <p>The "glass" can be sledded from the top and can be a max of 1.5 mm thick. I'm using some plastic sheet I had lying around in my workshop.</p> <p>For now, I have customized it for Ghost BC and for Týr, the paint job if it can even be called that was done with a napkin and some acrylic paint, so it's rough, but I didn't have any brushes at home and the background is still to be painted for contrast of the silhouetted pick.</p> <h3>Print Settings</h3> <p><strong>Notes:</strong></p> <p>I used a resin printer, but really any printer could be used just the hanging teardrop hole won't work, but you can still use blue tack or double-sided tape or any other mild adhesive to hold it, since it's not a piece that has to be handled and its quite light anything works.</p> <h3>How I Designed This</h3> <p>Everything has been designed using solid works (its really nothing fancy but it does the trick ).</p> Category: Music