Picatinny Accessory Mount CAD Template

prusaprinters

<p>STL and STEP files of an accessory mount template that attaches to 1913 Picatinny rails. I&nbsp;<br>designed this model myself for developing accessories for modern carbines and the like.</p><p>These files are intended to aid in firearm accessory design. Whilst they can be 3D printed,<br>they're mainly meant to be used in CAD software such as Fusion 360.</p><p>&nbsp;</p><p>Hardware Needed:</p><p>1x M5x30 Hex Socketed Machine Screw/Bolt</p><p>1x M5 Hex Nut (Be sure both bolt &amp; nut are the same thread pitch.)</p><p><br>Installation:</p><p>1) Press the M5 hex nut into it's indexing socket.</p><p>2) With the hex nut installed, slide the template onto the rail and align the bolt channel with<br>&nbsp; the preferred rail slot of installation.</p><p>3) Drive the bolt through the channel and start threading into the hex nut.</p><p>4) Tighten the bolt into the hex nut until the template is mounted firmly in place. The end of&nbsp;<br>&nbsp; bolt shouldn't protrude past the hex nut indexing slot. Avoid overtightening the bolt.&nbsp;</p><p>&nbsp;</p><h3>Print instructions</h3><p>Print Settings:</p><p>Extruder: 204C&nbsp;<br>Bed: 56C&nbsp;<br>First Layer Print Height: .22mm&nbsp;<br>Standard Layer Height: .16mm<br>Wall Thickness: .40&nbsp;<br>Wall Perimeters: 3<br>Infill: 20%<br>Infill Pattern: Gyroid<br>Material Flow: 100%<br>&nbsp;</p>