PI3MK3/S Camera/Phone crane

prusaprinters

<p>This is a crane I designed for holding a camera/phone on top of a Prusa I3 mk3/s. The files come included with all on one plate(Whole part.stl) Only the crane (Crane.stl) and the angled support.</p> <p>The parts you see for holding the phone are from the tripod phone clamp V2 made by Stamos. Original part link: <a href="https://www.prusaprinters.org/prints/25969-tripod-mobile-phone-clamp-v2">https://www.prusaprinters.org/prints/25969-tripod-mobile-phone-clamp-v2</a></p> <p>The crane itself is based on a filament guide for the prusa.</p> <p>ATTENTION: Can interfere with the extruder assembly if high enough.</p> <h3>Print instructions</h3><p>Use the same instructions as Stamos gives but the screw is already assembled.<br/> The Big screw <strong>NEEDS</strong> to be printed with a <em>brim</em>. I also recommend printing it with 0.15 layer height (The big crew and the small screw) The other parts will be fine with 0.3 layer height.</p> <p>Brim <em>recommended</em> with the big crane part.</p>