Pi Pico Simple Protective Base

prusaprinters

<p>I wanted something simple to protect the bottom of the Pico while I prototyped. &nbsp;Just place the Pico on top and then use something hot (I used a soldering iron at lowest temp) to squish the stakes to hold the pico in place. &nbsp;Removing the Pico is as simple as scraping the top of the stakes off, or just popping the Pico off.</p><p>Does require the headers installed on top, but that's how I use my prototyping Pico. &nbsp;Will work with male headers too, as long as the soldered ends are no more than ~3.5mm (extending 2.4mm below the board).</p>