PI-kvm v2 case with oled display and GPIO/ATX cutout
thingiverse
Remixed https://www.thingiverse.com/thing:4916230 to include a 3x2 cutout for GPIO pins 13-18 which include 3.3v and GND as well as 4 GPIO pins used to send ATX reset and power commands and read the status of HDD and Power LEDs. See [diagram](https://raw.githubusercontent.com/pikvm/pikvm/4d6bbac5e273c8bb84ea1d7473df47c8b02cc479/img/v2.png) for wiring, but use pin 14 for GND (instead of pin 6 in diagram), and pin 17 for 3.3v (instead of pin 1 in diagram) Also included an (untested) version that should break out all of the GPIO ports. Use 3x M2.5 screws to mount the OLED display and print one of the spacers for the outside corner to support the board against the Raspberry Pi.
With this file you will be able to print PI-kvm v2 case with oled display and GPIO/ATX cutout with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on PI-kvm v2 case with oled display and GPIO/ATX cutout.