Pi-Crates

prusaprinters

<p>Interlocking crates for Raspberry Pi's, Hats, Phats and much more.</p> <p>Often when you have a box of electronics in a box or drawer and if its loose or poorly protected it can become damaged.</p> <p>Here comes Pi-Crates:</p> <p>Pi-Crates is a standard system that you can print out and stack within your own storage method. On the sides there will be room for labels or you could colour code the material itself.</p> <p>Currently uploaded are the following files:</p> <ul> <li><p>pi-crate : Home of the Raspberry Pi</p> </li> <li><p>pi-crate-lid : Lid for the pi-crate</p> </li> <li><p>hat-crate-8mm : Crate for hats that a less than 8mm tall (sensehat without gpio pins and pimoroni skywriter, drumhat, unicorn)</p> </li> <li><p>hat-crate-10mm : Crate for hats that a less than 10mm tall (Also good for laying the loose gpio pins for the sensehat)</p> </li> <li><p>hat-crate-20mm : Crate for hats that a less than 20mm tall</p> </li> <li><p>hat-crate-lid.stl : Lid for the hat-crate</p> </li> <li><p>phat-crate-13mm : Crate for phats and Raspberry Pi Zero that a less than 13mm tall</p> </li> <li><p>phat-crate-lid.stl : Lid for the phat-crate</p> </li> </ul>