Pi Case with Prusa mount

prusaprinters

<p>This is a Raspberry Pi 3B+ case as well as an optional mount to attach the case to a Prusa i3 Mk3. You will need four M2.5x16 socket head cap screws to close the case halves, and two M3x6 socket head cap screws if you attach the optional mount. The mount has clearance holes for M3 screws in it, and the holes are spaced 42.5mm apart to fit the existing M3 tapped holes in the prusa backplane just above the electronics.</p> <h3>Print instructions</h3><p>I print this in a .2mm layer height without supports. Using supports will leave the counterbored holes clean, but require you to pick out the support material.</p>