Pi Case for Arducam HDMI Adapter With Fan (30mm or 40mm)

prusaprinters

<p>This is a case for a Rasberry 3B+ and is a remix of "Raspberry Pi 3 B+ Ultimate Cooling Case" by Pablofette" This case is designed to hold an HDMI adapter, a fan and a on-off switch for the Pi.</p> <p>This Pi case is made to fit with an Arducam CSI to HDMI adapter that can be found on <a href="https://www.amazon.com?linkCode=ll2&amp;tag=thingiverse09-20&amp;linkId=e4759bff1fa9a55a0f897d801ce2d765&amp;language=en_US&amp;ref_=as_li_ss_tl">Amazon</a>. It's used in conjunction with the HDMI camera mount <a href="https://www.thingiverse.com/thing:3421954">https://www.thingiverse.com/thing:3421954</a>.</p> <p>What this does is eliminate the ribbon cable going to the camera and instead uses an HDMI cable, so if needed you can have a longer cable. It's also neater and much more robust than a ribbon cable. You will need a low profile HDMI cable either with or without a flat 90 degree end.</p> <p>This case also has provision for a 30mm or a 40mm fan. I put a 30mm fan in mine because I found it with the pins for the GPIO connector.</p> <p>I also put a 10mm hole in the side of the case for a on-off switch.</p> <p>To mount the Arducam adapter you will need some very small screws, I don't know the size as I got mine from another electronic project. Maybe M1 or M1.5.</p> <p>To mount the Pi I drilled out the mounting holes and used screws. The original thing used printed pins which I have included the STL file.</p> <p>The screws for the case I used M3 x 25mm.</p> Category: 3D Printer Accessories