pi camera v2 (8mpix) original lens OR m12 lens mount and case (go pro type mount)

thingiverse

[](https://www.buymeacoffee.com/squirrelf) **Please consider a donation (use the tip button or buy me a coffee ) this took a lot of time to put together.** --- Quick setup: - case_back_combined_with_camera_back.stl - case_front_with_screw_holes_with_mount.stl - camera_front_10mm.stl (or any other size) OR camera_front_original_lens (if you don't want to use an m12) --- use filenames to figure what you need: camera_front & camera_back are more like a PCB wrap + m12 mount case_front and case_back wraps the whole things (including camera_front & camera_back) There is a version of the case back that integrate the camera_back as well. I recommend printing the case from that has the screw holes you might be able to use it with the original lens as well, just use the shorter lens barrel, untested, not sure if the field of view is narrow enough only tested prints at 0.1mm layer height (no support) this is printing the actual m12 screw, worked everytime for me. make sure the lens is perfectly aligned when screwing it in m2 screws are used (depending on configuration somewhere areoun 8 to 10mm long, maybe eve 12mm long) go pro type mount. only tested on official pi camera v2 (clones might not work) lens hood are just a concept, not very user friendly the tight version are too tight on my machine for most lenses, except for an m12 lens I have that has a smaller screw.