
Pi Camera v2.1 Mount for 3D Printer
thingiverse
<h1>CAUTION: DO NOT USE this bracket if you have installed a BL-Touch sensor on your Ender 3 v2 printer</h1> USE THIS ONE INSTEAD https://www.thingiverse.com/thing:5260294 I decided to remix the idea for a Pi Camra mount bracket because I wanted to include a lens protector to cover the lens from direct contact from lighting as the camera module itself has low specifications and ligthing conditions would affect the quality. I only borrowed the bracket from Ender 3 Camera Mount for Raspberry Pi Camera V2.1 by Codemonkey1973 (https://www.thingiverse.com/thing:3294512/remixes) and built the case from scratch to make it simple enough. Though the position of the camera mounted is not ideal for timelapse (not the best view angle) it is suitable for video capturing and print monitoring. I chosed this mount position because I am using a Raspberry Pi Zero 2 W for Octoprint and this decision limits me to use only 30cm of ribbon cale to connect the camera with the RPi Zero. The camera suits perfectly inside the back case without screws and the front case snap securely. The only extra thing you will need is a M3 screw. Finally, the hole in the front case (without lens cover) is big enough to fit the tool that the Pi Camera comes with to adjust focus. **Tested on a Creality Ender 3 V2**
With this file you will be able to print Pi Camera v2.1 Mount for 3D Printer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Pi Camera v2.1 Mount for 3D Printer.