pi 5 official case active cooler insert small camera and display
prusaprinters
The pi official case lid still fits over the components to hide them if wanted. I mainly use the display to find the IP address of my pi.Products used:Pi 5Active CoolerPi 5 CasePi Camera (This Camera https://www.adafruit.com/product/3508 should also work, but I haven't tried it.)Stemma/Qwiic Shim for PiMicro OLED BreakoutStemma Cable (50mm)Hammer Header (Regular headers like https://www.adafruit.com/product/4079 may work but you might need to cut them down to fit.)You'll also need a M3x8 and/or M3x10 screws (2 total) and 2 M3 nuts. I'm using the 8 mm screw above the active cooler and the 10 mm screw along the edge. I connected the hammer header to the Pi's GPIO pins and wedged on the Qwiic Shim. This wasn't giving me the most reliable connection to the OLED display so I ended up making sure everything fit well, then soldered the Qwiic Shim to the hammer header. You may also need to sand/grind the edges of the OLED display so it fits in the cover.Code instructions can be found here: https://adafruit-playground.com/u/bdsvac/pages/raspberry-pi-stats-display
With this file you will be able to print pi 5 official case active cooler insert small camera and display with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on pi 5 official case active cooler insert small camera and display.