Pi 4 Case for Prusa MK3/MK3S

thingiverse

**NOTE:** This is for a Raspberry Pi 4. [See HERE](https://www.thingiverse.com/thing:2989609) for the Pi 3/3+ version. I've seen many cases for mounting a Raspberry PI to the MK3 over the Einsy case. This mounts a Raspberry Pi 4 on the right side under the bed, which makes cable management a bit cleaner. Print the bottom part and one of the tops depending on whether you need a slot for the camera's ribbon cable or not. Also needed: * 1x M4 T-nut for 30x30 extrusion * 1x M4x10 cap (or pan head) screw. * 2x M3 Square nuts * 2x M3x 8MM cap screws up to 12mm length should work Be sure to look for drop-in T-nuts, so they can be inserted without disassembling the frame. I wouldn't necessarily recommend buying any of the following, because the kits contain too many parts for this project, but for reference I built my Pi case by pulling from the following products: https://www.amazon.com/gp/product/B0785PJZTP - M4 T-nuts for 30x30. https://www.amazon.com/gp/product/B015A351WS - M4x10 Cap screws https://www.amazon.com/gp/product/B018503K94 - M3 Square nuts https://www.amazon.com/gp/product/B072FKMYMF - M3 Cap screw kit (various lengths) Starting your shopping in the Prusa Spares bag is a good idea.