Phrozen Sonic Mighty 8K lids and trays

prusaprinters

<p>This is a set of lids, and trays, for protecting and storing your Phrozen Sonic Mighty 8K trays. It comes in a number of different options, suitable for whatever FDM printers you may have. I have tested the prints on Prusa MK3S's, Creality CR10s and Creality CR6-Max.</p><h4>Lids</h4><p>The lids comes in two basic models:</p><ul><li><strong>Full</strong>: These are the full models, requiring a pretty large print area</li><li><strong>Split</strong>: These are split with dove tails, and should print on almost any FDM printer</li></ul><p>The split models, with the dove tail joints, fit perfectly printed on my MK3S with a 0.20mm extra gap. However, on one of the Creality printers, it was a fairly snug fit and I had to use a mallet to hammer (carefully) the two pieces together. That still worked well, and made a perfect joint without glue!</p><p>In addition, the lids have two more variations:</p><ul><li><strong>Holes</strong>: These have holes cut out to allow putting a lid on without removing the vat screws. This is what I use for my day to day protection of the resin in the vat when not printing.</li><li><strong>Logo</strong>: These have a logo on top embossed. This may be trickier to print with the split models (above), and may require supports for the edges / dove tail areas.</li></ul><p>I'd love to hear success or failures here, to see what I may have to change and fix.</p><h4>Bottom trays</h4><p>These also come in the same full and split layout as the lids, and has an optional front side logo. Obviously no holes needed on these trays.</p><p>&nbsp;</p>