Photon S dual RC 203 exhaust

thingiverse

These fans take two 80mm x 25mm units below the filter shrouds, directly pushing air into the filters. This utilizes Morairtym's duct design shown here: https://www.thingiverse.com/thing:3591774. I have included a divided version that can be printed on these printers as well. Place supports manually on the upper end and bottom of the tubing to avoid cleaning inside the tubing. Support any overhangs except for the tubing ID with heavy supports, as this is a functional part. You can use 30mm or upgrade to 40mm build area fans to feed the duct for stronger negative pressure in the housing, keeping vapors out from the door. Future plans include adding a duct from the electronics area to the build area to intake heated air. The filter exhaust itself has been divided with dovetail joints, allowing for precise fit and then can be super-glued together at the seams. Glue centers together first, then slide on the sides. Two RC203 filters are required, and a Fusion file is included if you'd like to make any changes.