Photo Tree

prusaprinters

<p>Build your own photo tree with your favorite pictures*!</p><p>The photo tree is designed for 15 x 10 cm photos (landscape) and holds 5 photos per layer. You can stack mulitple layers on top of eachother and each layer can rotate so you can change what photo is in front or just rotate thru your photos to bring back memories.<br>&nbsp;</p><p>This design is made out of 4 parts:</p><ul><li><strong>root.stl</strong> - the base for the photo tree</li><li><strong>trunk.stl</strong> - the middle part of the design. You can print multiple of this part to grow your tree up to the sky</li><li><strong>branch xyz.stl</strong> - the part that holds your picture. You need 5 per trunk. There are 2 options for the branch: 1 with a small tab on the front to make rotating easier and one without (maybe more aesthetic)</li><li><strong>crown.stl</strong> - to top off your photo tree in an orderly fasion. This part is optional.</li></ul><p>No assembly instructions needed, it's really straightforward.</p><p>All parts print without support and fit on a prusa mini build volume. 2 Perimiters and 10% infill should do the trick for you.</p><p>Who will make the tallest tree? Happy printing!</p><p>* Test pictures for the tree are included for your convenience ;-)</p><p>&nbsp;</p><p><i>(The Photo Tree made by me only shows one layer due to lack of time and filament. And when you look closely you see different sizes of branches, this was for testing what worked best - only the best design is uploaded for you to download)</i></p><p>&nbsp;</p>