Photo frame with passe-partouts and stand

prusaprinters

Photo frame and stand for photos of 10 cm (4") * 15 cm (6")Can be hung horizontally or vertically or tilted on a standard 7.5 degrees with 7 different passe-partoutsThe slot is 3 mm thick so that a photo with passe-partout can be inserted.Can also be done without a passe-partout, but then a filler plate is needed, which can also be downloaded from the .stl files.Instead of a passe-partout or filler plate, a glass plate of 2 mm thick can also be placed in front of the photo.The frame can be closed with a lit and can then be hung using the blind keyholes at the back.The photo frame can also be placed in a position that tilts the frame 7.5 degrees. The stand is also the right way to close the frame, so that the photo frame and stand become one.Available passe-partouts:1st prizeChampionEllipseForever in our heartsmy loveKeyhole ulala (for over 18 years)RectangleI printed everything on my Prusa Mini+The photo frame with the slot upwards and support at the hole for the photo.All printed with 0.2 layer thickness and 15% infill