Phone stand - Loopy case and Popsocket compatible

prusaprinters

<p>Desktop phone stand fits a variety of devices and cases. Compatible with Loopy cases and with Popsockets or other fixtures attached to the back.</p> <h3>Print instructions</h3><p>Prints clean with no supports required. Model will come into the slicer already oriented on it's side. 0.3mm layer thickness works fine.</p> <p>Recessed holes included on the bottom for optional grip pads. To add grip pads using hot glue:</p> <p>1) put a piece of aluminum foil or wax paper on a smooth, flat surface (like a marble counter top)<br/> 2) turn the print upside down<br/> 3) put equally sized drops of hot glue in each recessed hole, approximately twice the depth of the hole<br/> 4) set the stand on the foil or wax paper and let the glue cure<br/> 5) a couple of popsicle sticks or coins are useful to hold the base level while the glue is curing<br/> 6) peel the foil or paper off the glue pads and use your new stand</p> <p>Hope you find it useful.</p> <p>Gcode file is set up for Atomic Filament PETG.</p> <p>Original work, modeled in Autodesk Fusion 360</p>