Phone holder with wireless charger for Mi11 in Jaguar XF (X250)

thingiverse

I designed this to hold my Xiaomi Mi 11 in my 2009 Jag XF (X250) and I printed it in PLA It is made up of 3 pieces: a base that fits the front cupholder, a main body and a clip. Also required are 3 screws to mount the body to the base, a long 3mm capscrew (or similar) to mount the clip and a spring. The base and clip do not need any support but the main body should have support from buildplate and model as per the image (use support blockers to keep the holes clear) Tree supports can also be used but they take longer to print. My method of mounting the clip is to open the hole up to 3mm in the clip and one of the ears in the main body and then an M3 screw can tap its own thread into the other ear. The spring just needs to fit into the hole in the main body so any old spring will do. If it doesn't provide enough tension to hold the phone it can always be stretched a bit. For mounting the main body to the base I prefer to put a drop of super glue into each hole before screwing it together to strengthen it. Also, the holes may need drilling out depending on the size of screws you use. The wireless charger pad is a friction fit in the recess but you can add some double sided tape if needed. The charger pad is from amazon https://www.amazon.co.uk/gp/product/B08ZYHJNHK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Good luck