Phone holder for Eternico tripod

prusaprinters

This is a phone holder for Eternico tripod. Everything is printed on 0.15mm layer hight with PLA filament.The tripod for this model can be found here [alza.cz].Specifications and featuresVariable width for phones between 70mm and 85mm (remixes are welcome)Rotatable standInterswappable for other Eternico accessoriesBuild instructionsThe building process of this gadget is really straight forward. You just need glue and WD40 for better results. All parts are on the last photo.Print all of the parts. Every part should be printed once. Note: You can print bolt.3mf and Nut.3mf in different color for aesthetic ✨ Put some glue on bottom part of Vertical stick.3mf and put it into Eternico adapter.3mf. It should slide in pretty easily. Glue Thread.3mf into Phone arm.3mf. There is a hole for the glue Put End piece.3mf onto the thread and secure it with Nut.3mf.Note: You can use WD40 on the threads for smoother movement Grab the assembled phone arm and put it onto the vertical stick. Secure both together with Bolt.3mf.