Philips Hue Remote Control Holder
prusaprinters
Update 04.02.2023Added additional model (v8). This one uses zip ties, no screws required.DescriptionPhilips Hue remote control holder. Can be attached to any kind of rods of about 35mm diameter. Original Version (v1): A 16mm M3 screw and a hexnut are required to tighten the mount. Print the mount with PETG because this flexes better than PLA and does not break when bending. Print the remote control holder with the backside on the bed. The holder has a sacrifical layer which has to be cut out after printing. Stick the two parts together with super glue.Zip tie Version (v8): Print the model standing, use two zip ties to secure it.Print InfoMaterial: PETGLayer Height: 0.2mmInfill 15%
With this file you will be able to print Philips Hue Remote Control Holder with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Philips Hue Remote Control Holder.