PHIL - Modified Filament Holder by Shaputer
thingiverse
This is a SUPERB design! I wanted to utilize some parts I already had, so I decided to just use the base and add "V" rollers and bearings instead of 3D printing the wheels. The result runs extremely smooth and I'll never have to make another one again. After printing mine, I realized the optional mounting holes were in an awkward position, so I also moved those holes closer together so that you can screw it out with the rollers attached. Video HERE: https://youtu.be/9WDdDuQLIIY I printed these on my Makerbot Thing-O-Matic (yes, I still have it after 4 years and it still works). I wanted two sets for my new Dual Extruder 3D printer that I am preparing to build next - the GEEETech I3 Pro C. The bases have a little weight to them so they are sturdy and don't slide around. Here are the parts: Bearings and V Wheels (Quantity:4) https://www.inventables.com/technologies/dual-bearing-v-wheel-kit M5 X 25mm Cap Screws - For Bearings and Wheels (Quantity:4) https://www.inventables.com/technologies/button-head-cap-screw 5mm Washer - To fit between Bearings/Wheels and Side of 3D printed Base (Quantity 4) http://www.mcmaster.com/#93475a240/=10tnt98 5mm Nuts - For Bearings and Wheels (Quantity:4) http://www.mcmaster.com/#90576a104/=10tnrlz Enjoy! Print Settings Printer Brand: MakerBot Printer: Thing-O-Matic Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 100%
With this file you will be able to print PHIL - Modified Filament Holder by Shaputer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on PHIL - Modified Filament Holder by Shaputer.