Phelps3D Transformers G1 Needlenose Parts

cults3d

This includes G1 Needlenose's helmet, back tail wing, Sunbeam and ZigZag targetmasters. These were all printed on the Longer 10 Resin 3D printer. Please note that while resin 3D printing is more accurate with details, they can still vary greatly from print to print. This is mostly due to the “bleed” factor of the UV light exposure. What I did was to take the still slightly uncured parts and place them into their post holes to sort of “scrape” away excess prior to fully curing them under a UV lamp. (Note also that the white tends to change color after curing. Mine had a bit of a yellowish/red coloration. Sunlight UV curing may be a better option for white.) Also, standard resins are quite brittle and do not have much flex to them. I made sure to run a 5 mm drill bit through the holes after curing to ensure their tolerance was correct. I did it after because there is always some shrinkage when the objects cure.