Phanteks P400 raised feet
thingiverse
These feet will raise your **Phanteks Eclipse P400** case from the floor, ideal if you have carpet/rug underneath. The original case is too close to the floor in my opinion, which is not a big problem for cooling cause only the power supply takes air from the bottom but it is hard to clean and keep it without dust/hairs/spider webs :D You do not need to remove the original feet of the case. I tested it on a P400S but I am almost certain it is compatible with P400A too. Maybe other Phanteks cases, check the drawings for the measurements. Each foot consists of 2 parts: a top one and a bottom one. **Bottom part is the same for all four feet** of your Phanteks case but top part is different. **Two of the feet** will need the **regular top** part and the other two will need the **mirrored top part**. You will need 8 **M3.5 10mm screws** in total (2 per foot). If you have shorter M3.5 screws that is probably fine too. You can easily glue the pieces together if you don't have screws. You will also need some **teflon tape** so the feet stay in place when you lift the case. _If you need help feel free to contact me:_ https://salvatorelab.com/contact/
With this file you will be able to print Phanteks P400 raised feet with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Phanteks P400 raised feet.