Petsfang Micrometer Adapter

cults3d

Adapter for placing a micrometer on the BullsEye Petsfang layer fan to level the bed perfectly and quickly. The micrometer is attached with neodymium super magnets to allow easy placement and removal once the bed is adjusted. The digital micrometer I have used can be replaced with a cheaper and more durable analog one. The Pestfang's Bullseye layer fan is one of the best tested, it can be downloaded for CR10, Ender3, MicroSwiss, Stock, E3Dv6, Volcano, TevoTornado or Tarantula in this link (https://www.thingiverse.com/thing:2759439) or download the one I've uploaded for Ender 3. Once placed, open the notepad and copy the following code to create your own custom gcode file. In my case I have a 220x220 bed and I have configured it to adjust the central zone. The only thing you have to do is adjust the first corner with the traditional paper method the first time. M190 S60 ;Sleeping temperature at 60C M104 S195 ;Temp extruder 195C M109 S195 ;Wait for extruder 195C G21 ;Initializes to ref. G90 ;Absolute position M82 ;Absolute position extruder M107 ;fan off G28 X0 Y0 ;X/Y at end of stroke G28 Z0 ;Z at end of stroke G4 P20000 : Wait 20 sec for adjustment with first corner paper G1 Z25.0 F9000 ;Z to 25 G92 E0 ;extruder reset G1 F9000 M107 ;fan off Move the P&ID to each position G0 F3500 X500.000 Y50.00 Z5.000 M117 ;zero P&ID G4 P10000 ;wait 10 sec for P&ID to zero G1 X190,000 Y190,000 G4 P10000 ;wait 10 sec for corner adjustment G1 X190,000 Y50,000 G4 P10000 ;wait 10 sec for corner adjustment G1 X50,000 Y190,000 G4 P10000 ;wait 10 sec for corner adjustment G1 X50.000 Y50.000 ;returns P&ID to initial position G4 P10000 ;wait 10 sec for corner adjustment M107 ;fans off G0 F9000 Z25 ;Z at 25mm ;End GCode M104 S0 ;Extruder temperature off M140 S0 ;Bed off temperature M84 ;For engines Explanatory video https://youtu.be/FXu7oH0-PXU