Petsfang Duct for Alfawise U10

thingiverse

Petsfang for Alfawise U10 ***** 9.21.2018 I was asked by Tim at TH3D to design a duct system to cool his new .8mm nozzle on his Alfawise U10. He needed good cooling for large vases, so I designed this mod with two separate plenums and a balance port in between. The balanced port adjusts the positive pressure within each duct, producing balanced airflow from each out-port. It has high velocity at 100%, so test prints with your filament are recommended to determine printed part needs. This design is for .3mm or greater layer thickness and .6-1mm nozzles. Dualfan is best used with a Volcano Hotend. <img src="https://cdn.thingiverse.com/renders/76/0d/3f/1c/71/d1f4f9850dd261e2a7a1b1b4fe00a2f8_preview_featured.jpg" width=500 height=400> ***** 6.7.2018 New files have been uploaded with the right mounting hole's refined location. The backplate clip is tightened up, and routing for wires from the right side has been added. ***** <font size="5" color=red>Files starting with u10 are specifically designed for the stock hot end.</font> ******* <font size="2">All U10 Files are now available. I would like to thank Raymond Borrego for his help on prototype measurements and the U10 back plate. It's more than just mirroring the mount!</font> ***** If you're looking for the regular Petsfang, follow this link: https://www.thingiverse.com/thing:2759439 <img src="https://cdn.thingiverse.com/renders/4d/01/6f/13/83/09d53f4cffe6d69933b4eb9886597013_preview_featured.jpg" width=600 height=1000> ***** <font size="3"></font> ***** I am currently working on bases and ducts for the Alfawise U10 large format 3D printer. Stay tuned as we test these new designs on this platform.