Pet Door with 4-Way Latch & Magnetic Door Return V2

prusaprinters

This model is an improvement to another design of mine.Features4-Way Latching Mechanism:4-way selection knob to set 1) Both ways open, 2) Both ways closed 3) Exit only, and 4) Enter only.Removable latch cover to easily clean out the latching mechanism.Magnetic Door Return: Magnets inside the frame/door to fully close the door and prevent gusts of wind from blowing the door open.Water resistantDesigned to keep water out and channel water that enters the latch mechanism back outside.AdaptableA parametric Fusion 360 files allows you to easily customize the exact size and thicknessAn insert may be printed to fit this door to ¼" thick board. This same insert can be traced onto your wall for cutting the opening for the door. A look InsideMagnets inside the door and frame return the door to the correct positionThe latch mechanism is spring loaded to provide a nice click between each setting Materials:Printed Materials1 x frameInner1 x frameOuter1 x dirtTrap1 x acrylicDoorA1 x acrylicDoorB2 x latch1 x key2 x knobPurchased Materials14 x M3x148 x M3 square nut40 x 4.8x9.5x2.8mm magnet2 x Bic Ball Point Pen Spring1 x 141x149x2.8mm acrylic sheet