Persiane Smart - Smart Shutters

grabcad

To open CAD files you can use the free FreeCAD software. Some tips for mounting the system: The L-shaped iron plate that is screwed to the gearmotors must be drilled and threaded M5, for the position of the holes refer to 3D. You can order the extrusion of ITEM with accessories from their site even if you're a private individual, but there's a catch - you have to spend at least $110 (for an extruded part that's about 1 meter long it costs around $32 - used in the video). The material codes are: Extruded 60x12 light 1Piece (47807), Connection Set 2 Pieces (41971), Cap 1 Piece (60929) you can also print this yourself. If you take the extruded part that's already cut to size, there will be an extra cost of cutting when ordering, but it's less than $3. When mounting the 2 connection pieces in the extruded slots, make sure to insert them in the right direction or they'll screw together crooked (refer to 3D). You don't have to use this extrusion, there are also extrusions on Chinese sites, but you won't find them in this size, the smallest one I found is 80x16. If you want to change the extruded parts, make sure to check the position of the motor on different parts and see if it works in that position. To know all the commercial components, check the video description, you'll also find a link to the software.