Peristaltic Pump Stand
thingiverse
This is a stand for a standard 12-volt peristaltic pump, widely available from various suppliers. The specific peristaltic pump used and mounted on this case is the Adafruit Peristaltic Pump (available at https://www.adafruit.com/product/1150). Required Hardware: * Two M2.5x16 Socket Cap Screws (available at Trimcraft RC, https://www.trimcraftaviationrc.com/index.php?route=product/product&product_id=199) * Two M2.5 Nylon Lock Nuts (available at Trimcraft RC, https://www.trimcraftaviationrc.com/index.php?route=product/product&product_id=237) To ensure successful installation, it's recommended to dry-fit the bolts and nylon lock nuts before installing the pump, as printer tolerances may vary significantly between machines. If available, small zip ties can also be used effectively.
With this file you will be able to print Peristaltic Pump Stand with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Peristaltic Pump Stand.