Perforated Sink Sponge Holder(s) - Single + Double Sided (15mm or 20mm Pinch)

prusaprinters

<p>After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - <strong>preventing moisture build-up</strong>.</p><p>This was <strong>designed to straddle the ~32mm wide divider</strong> running down the middle of my (fairly standard) double sink.</p><p>I have provided files for <strong>SINGLE</strong> and <strong>DOUBLE-SIDED</strong> versions, each with either a <strong>loose (20mm)</strong> or <strong>tight (15mm)</strong> sponge pinch. My preference is for the single-sided, tight pinch, but depending on your setup + sponge, choose what's best for you!</p><p><strong>Print Settings:</strong></p><p>I printed mine in <strong>PETG</strong> with <strong>3+ perimeters</strong>, <strong>0.3mm layer height</strong> and <strong>20%+ infill</strong>. &nbsp;The print <strong>shouldn't require support material if printed on its side (see .3mf files)</strong>.</p><p><strong>Warning:</strong></p><p>Use at your own discretion, and please err on the side of safety. I will not be responsible for any harm that comes from the use, misuse or breaking of the device.</p><p>Enjoy! And please post pictures of your makes!</p>