Peregrine Micro UAV Sample

thingiverse

The complete model is located at https://www.3dprintair.com . Visit our facebook page at https://www.facebook.com/3dprintair to stay up to date with the latest developments. The Peregrine is the smallest brushed fixed wing UAV in existence that can be printed with a FDM 3D printer. It's also the fastest printable fixed wing UAV, with all parts capable of being produced by one printer in under 12 hours, making 3D printed UAV swarms possible. The Peregrine is designed not to be glued together, so all parts are hot swap-able. This design prints more quickly and has less retraction points than separate designs. The wingspan is 250mm, and the weight is only 18 grams. The fuselage wraps around the wing and is secured at the back with two small m3 nylon screws. Servos that are mounted to the wing are locked into place when the fuselage is attached. The Peregrine supports 11XX sized brushless motors, with a common 9mm mounting pattern, and offers a couple options for mounting cameras to the front of the fuselage. The servo is located very close to the control horns on the bottom side of the wing. Control surfaces are mounted with fiber infused packing tape, articulated with classic servo arms and 1mm control rod. General Specifications: Wingspan: 250mm Dry Weight: 40 grams Material: PLA or PETG Recommended Parts: Motor: 1104-1106 Battery: 300 mah 2S - 800mah 3S Servos: ES5091 5g Propeller: 2.5 inch max ESC: 10 AMP