Peopoly Moai Heater Mount

cults3d

This is my design for mounting your Moai heater which can be purchased on the main Peopoly website: :https://peopoly.net/products/peopoly-heater-for-moai-moai-200?_pos=1&_sid=334964aee&_ss=r . There are 4 spot welded threaded standoffs on the back panel on the left side of the printer. Simply mount this part (with the heater already attached) on the "TOP" two standoffs. Leaving the bottom two alone. . Only pieces you will need to purchase are: . 4 M3-0.5 x 22 Socket Head Cap Screws (SHCS) 2 M3-0.5 x 4 Socket Head Cap Screws (SHCS) you may want to get slightly longer ones. These are for mounting. 2 #6 washers (9.85 mm O.D. 4.08 mm I.D.) 2 Plastic nylon caps (for mounting the heater power cord) I have noticed that the standoffs may differ in dimension so after you complete the print, make sure that the two mounting hols line up. If they are off you can simply use a round file or drill slightly larger holes. I don't see this as an issue for I have compensated for this in my design. . After several tests, this revision does not constrict airflow or cause the heater to "overheat". If you have any issues or questions, please don't hesitate to drop a line in the comments and I will make any adjustments required.