Pendant Lamp Shade

thingiverse

Lamp shade ranging from 500mm to 700mm wide, contingent on scale of print. Print quantity needed: Pendant Lamp Shade (1 of 2): 55 units Pendant Lamp Shade (2 of 2) - final installation, where power cable is threaded through: 5 units Shown in the photo, the lamp shades were printed at 90% scale. One was also printed at 100% and another at 125%. Each takes approximately one hour to print, so be prepared for a prolonged printing time. The longer section has five attached objects, requiring 8mm length M3 screws. The other four arms utilize 6mm length M3 screws. To connect the power cables, thread them through the last pendant lamp shades (2 of 2). Drill a 2.75mm hole in both pieces, then create a threaded screw using an M3 steel screw and secure the wire cable with a plastic M3 screw (6mm). You'll need to purchase a custom lamp cable for this project. The designs were created in Tinkercad, a CAD software tool. Updated 29/9/2018: A new 400mm lamp shade design now includes power cable connectors that allow for easy installation without rewiring the light. Enjoy!