PeggedBoard v1.1

cults3d

My WIP version of a 3d print friendly peg board alternative. It uses screw-in pegs with tapered heads and slots in the attachments. The pegs are spaced 25mm apart using #8 or #6 countersunk wood screws at least 1/2" long or any screw that sticks out from the peg less then 1mm. Update v1.1 - Double Standards: Added pegs for standard 3/16” pegboard with 1” spacing that presses in and lock with a M3x10mm countersunk screw and redesigned the hangers to a 25.2mm slot spacing to fit better on both. I also added a keyhole hanger that can be printed in any (basic) orientation. The basic peg is unchanged and the original hangers will fit on a 1” spacing as they were designed with a good bit of tolerance on the peg position, the redesign is to equalize the stacked position error on wider (5-6+) hangers. The redesign also allowed me to split the pegs and different width hangers into separate files that can be “saved as” for new holders. STLs included so far: Pegs: - Basic Peg - Long peg - Extra .5mm peg length for easy slip fits. - 1x2 Pegs - Add a quick hanger anywhere - 3x5 Pegs - A mini PeggedBoard with 3 rows of 5 pegs 50 mm apart v1.1: - push-in screw lock peg 0.25” and 0.27” Mounts: - 2w & 3w blanks - 2 square hooks (width x opening) - Small hammer holder - Screwdriver holders with holes - Screwdriver holders with slots and counterbores (width - c-bore dia. x c-bore depth/type) - 6x small screwdriver holder - Paper towel roll holder 40mm dia. - 2x2 Gridfinity baseplate New(v1.1): v1.0: - 1w Mini screwdriver holder with slot and counterbore (width - c-bore dia. x c-bore depth/type) - Black & Decker cordless drill / 1.5AH Max20V battery holder v1.1: - 2w & 3w slotted hanger blanks - 2w & 3w keyhole hanger blanks - Screwdriver holders with slots and counterbores (width - c-bore dia. x c-bore depth/type) STEP files, a drawing of the peg and groove, and F360 archive are included for making your own holders. v1.1 new F360 archive files for the peg, hangers, and screwdriver holder. Enjoy