Peg solitaire

thingiverse

Hi! This is a printable version of some hop-over solitaires that I created because I spent many hours playing with this type of toy when I was a kid, so I decided to make a printable version. Rules: Place all the pins on the board, leaving an empty hole. You can remove a pin by jumping over it with another pin. Only horizontal and vertical jumps are allowed. Only one pin can be jumped at a time. Your mission is to remove all the pins, leaving only the last one on the board. Does it look easy? Give it a try! Files Three boards (pyramid, cross, and octagon) Lots of pins, including 9mm and 10 mm diameter pins. The holes are 10 mm in diameter, and I've included pins with exact size and smaller pins as well. I usually print the pins at exactly their size and reduce 'horizontal expansion' in the slicer a bit to get a good fit. If you prefer, you can print the 9mm pins instead. I created three files with arrays of pins: Pyramid requires 14 pins, Cross board needs 32, and Octogon needs 36. Also included are individual pin files. Designed with OpenSCAD, I've included the .scad file too. I hope you enjoy it! Have fun! Print Settings Printer: BQ Prusa i3 Hephestos Rafts: None Supports: None Notes: Easy print. My settings: For the pins: 0% infill, 0.3 resolution, 2 shells, 2 bottoms, and 2 tops. For the boards: 20% infill, 0.3 resolution, 2 shells, 2 bottoms, and 3 tops. I've printed at 50% scale and it works well, but it's difficult to handle.... (do this only if you have small hands)