Peeping Owl 5015 fan mount bracket for Biqu H2 Extruder

prusaprinters

<p>B.OM. :</p><p>2 QTY heat melt inserts M3 x 5mm OD x 4mm Length (as used on voron builds)</p><p>3 QTY M3 x 8mm socket head cap screws</p><p>2 QTY M3 x 25mm socket head cap screws</p><p>2 QTY 12mm OD googly eyes</p><p>----------</p><p>The bracket uses 2 M3 screws secured in slots so you will need to adjust the height of the fan duct before using. &nbsp; I did this because there are several versions of the h2 with different heat blocks and I couldn't find a bracket that worked with my v2 heat block.</p><p>This is my process for dialing in the height:</p><ol><li>Secure the bracket screws just enough to prevent bracket from drooping, then slide the bracket to its highest position. &nbsp;&nbsp;</li></ol><p>&nbsp; &nbsp; &nbsp;2. Install fan and duct on bracket</p><p>&nbsp; &nbsp; &nbsp;3. Move the extruder nozzle tip to the bed and align fan duct by sliding it down gently</p><p>&nbsp; &nbsp; &nbsp;4. After dialing in the height, gently remove the fan and duct, trying not to move the &nbsp; &nbsp; bracket.</p><p>&nbsp; &nbsp; &nbsp;5. Fully Tighten the bracket screws then reinstall fan and duct!</p><p>&nbsp;</p><p>---------</p><p>The fan duct itself is not my design, all credit goes to HangTight on thingiverse… I am including it in this package for convenience and in accordance with his license. &nbsp;</p><p>Thanks.</p>