PDW Style Stock for M4 buffer tube

thingiverse

This is a custom PDW stock that can be installed on a standard M4 buffer tube. I designed it for my WE M4 GBBR, so the dimensions are somewhat "milspec". It uses the following components: 2 x 8mm rods - one of them will require 6mm slots cut into it for the locking mechanism 4 x M3 screws to attach the cap of the locking mechanism to the main body 1 spring (I used 2 pen springs) 2 x M3 set screws to secure the rods to the back piece 1 x M8 set screw to attach the main body to the buffer tube If you use the back piece with the shoulder plate, you will also need 4 more M3 screws. The distance between the center of the M8 set screw and the bottom of the main body is 62mm, so make sure that's the same as the distance between your castle nut and the first position on the buffer tube. If not, you'll have to modify the model. If you edit or change the model, please give credit where credit is due. And if you really like the design, consider showing your appreciation with a tip. Thanks