PCB_box

thingiverse

This is a design for a PCB enclosure that can be paired with another one of my designs, an adapter, as seen in the pictures provided. Links: PCB: https://www.amazon.ca/10-pcs-Prototype-Circuit-imprim%C3%A9-Veroboard/dp/B077BYYNGB/ref=sr_1_10?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=pcb+board&qid=1564446871&s=gateway&sr=8-10 Adapter (1): https://www.thingiverse.com/thing:3776710 Terminal block (6): https://www.amazon.ca/100-pcs-Pole-Mount-bornier-300/dp/B07D71JNQD/ref=sr_1_14?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Terminal+block&qid=1564367569&s=gateway&sr=8-14 To attach the adapter to the case, four M5 screws with nuts are required. Simply place the adapter at the back of the case and screw it in. Next, create wires that can be plugged into the board and welded to the terminal block. Place the terminal blocks in the holes at the top and bottom of the case. Then, weld the wires to the terminals. Secure the board to the case using M3 screws and plug the wires into the board. Finally, place the cover on the case, and you will have a nicely assembled PCB enclosure. Note: I am not responsible for any issues that may arise from this product. Please ensure that it is assembled correctly before use. A poor assembly can cause a fire.