
PC MINI-ITX CASE - Additionnal parts
prusaprinters
These are custom parts I made for the ITX case made by oximoron_fr. Front panel The hole for the power button have a diameter of 16mm and has been designed for this power button by averypierce. The holes for the LEDs are 3.25mm wide. 004A for bigger fan The fan I had on hand is about 25mm thick and with the original the fan would collide with the motherboard. I also had nothing good on hand to attach the fan so I made a M5 screw and nut that I added here as well (YMMV, I had to make the hole in the nut about 10% bigger, otherwise I could get the screw to fit in it) I also used this is the fan guard by pwing. Simple design, not restrictive on air flow. There are plenty of other designs out there too. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.24mm Infill: 20% Filament: 3D Printing Canada PLA Transparent Blue and Orange Notes: I printed this in PLA, since the fan is pushing a lot of air I'm not worried about heat building up in the case, it shouldn't warp. However if you're not going to use a fan, maybe PETG would be better? I don't know. These boards don't get too hot. Category: Electronics
With this file you will be able to print PC MINI-ITX CASE - Additionnal parts with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on PC MINI-ITX CASE - Additionnal parts.