PC External Radiator Tubing & Wiring Bracket

prusaprinters

<p>I designed this wall bracket to support the tubing and wiring for a PC external radiator (a Watercool Mo-Ra3) with fans. Made to support <a href="https://www.ekwb.com/shop/ek-tube-zmt-matte-black-19-4-12-5mm">EKWB ZMT 19mm O.D. Tubing</a> in the two outer holes. The single inner hole is 15mm I.D.</p><p>It's designed to clamp together with M3 hardware, but mount to the wall using a non-marring Command Picture Hanging strip, that is hidden in the bottom recess (including the pull-tab for later removal).&nbsp;</p><h5>Bill Of Materials (per bracket assembly)</h5><ul><li>(2) M3 Cap-head screws, 15-20mm length, can't remember exactly</li><li>(2) M3 nuts to press into the bottom part. These can be lock-nuts too if desired</li><li>(1 pair)<a href="https://smile.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72"> 3M Command Picture Hanging Strips (Large Size)</a></li></ul><h5>Assembly</h5><ol><li>First press the M3 nuts into the cavities on the bottom part.</li><li>Test assembly to make sure you selected the right screw length. You want to avoid the screw extending far beyond the nut to try and keep the recess surface smooth.</li><li>Attach one side of the Command Strip pair (the Velcro-like surface is the same for both mating surfaces) to the bottom part, concealing the nuts</li><li>Attach the other Command Strip to the desired mount point, and press the two parts together</li><li>Press the assembled bottom part to the wall, and leave it for at least an hour to give the adhesive time to bond.</li><li>Insert Tubing and wiring</li><li>Insert M3 screws and tighten</li><li>Enjoy!</li></ol><h5>Print Settings</h5><ul><li>Printed with PolyMax PLA</li><li>15% gyroid infill</li><li>I printed both parts with the mating surfaces facing up, but YMMV</li></ul>