PC-9800 C-Bus Mount for CF Card Adapter and Gotek Floppy Emulator
thingiverse
If you don't have good access to HDD/FDD adapters/emulators via the front panel of your PC-9800, but you have a free C-Bus slot, this will let you mount cards via the rear of your case. For example, if your model's faceplate has cutouts specifically for floppies and no expandability.Built around the StarTech CF-IDE adapter, others might work too.OPTIONS:CF HDD adapterCF HDD adapter + Gotek FDD emulatorCF HDD adapter + Gotek FDD emulator + Mouse Ears (if your print lifts off the print bed)NOTES:The dual CF/Gotek adapter is a tight fit. You may have to bend the power connector vertical on the CF adapter. You'll probably also need to connect cables in a specific order - some may need to be connected only after sliding in. This works best (only?) in the top slot so you can plug things in after installation.Uses 2x 4mm M2 standoffs to raise the adapter up to give the solder points on the bottom some clearance.
With this file you will be able to print PC-9800 C-Bus Mount for CF Card Adapter and Gotek Floppy Emulator with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on PC-9800 C-Bus Mount for CF Card Adapter and Gotek Floppy Emulator.